• Leading European manufacturer of specialty chemicals
  • The long and famous tradition
    on the market since 1920
  • developed export
    around the world
  • responsible approach
    the environment
  • Strong in strategic research and development 
You can search name, CAS, EINECS

VERSANYL YELLOW S-10G

      

1/1

  

B=1/6

 
Characteristic
C. I. Pigment Yellow 3
C. I. No. 11 710
CAS No. 6486-23-3
Chemical Class Organic pigment
 
Physical Properties
Content of pigment [%] 40
Content of solids [%] 53
Specific gravity [g/cm3] 1,2
pH 6-9

 

Fastness
Light - Full Shade (1/1) 6-7
Light - B=1/6 6-7
Resistance to acids 5
Resistance to alkali 5

 

Application Possibilities  
Paints based on polymer dispersions of - Polyvinylacetate
suitable
Paints based on polymer dispersions of - Acrylate
suitable
Paints based on polymer dispersions of - Alkyde
suitable
Wood stains
suitable
main application using under certain conditions
 
Testing methods
 
  • Pigment preparations Versanyl are standardised in colour strength and colour shade. These properties are tested on the level of standard depth B = 1/6 by mixing of pigment preparation with the paint BALAKRYL V 2045/0100. Difference in colour strength ± 5 % is guarantined.
  • Content of pigment
     is tested by centrifuge method, small variability against the average value in the table is allowed, the value is not guarantined, because of garancy for colour strength.
  • Content of solids
     2 g of pigment dispersion was dryed in the lab oven at 105 °C till the constant weight. The value is not guaranteed, because it of garancy for colour strength.
  • Specific weight
     determined by pycnometric method. It depends on content of pigment
  • pH
     is determined by measuring of 4 % solution in destilled water. It depends on content of pigment
  • Lightfastness  - Xenotest
     determined by ČSN EN ISO 105-B02; 2000 (80 0147) in deep shade paint and in the level of standard depth B = 1/6, evaluated according to blue scale, by it degree 1 denotes the lowest fastness, degree 8 the highest one.
  • Resistance to alkalis and acids
     1,5 cm wide strips of draw downs at standard depth B = 1/3 were immersed with the dwell time of 5 min. in 2 % solution of caustic soda or 5 % hydrochloric acid, then washed and dryed. The change of the shade was evalued against the not immersed draw down by ISO - Grey scale. Degree 1 denotes the lowest fastness, degree 5 the highest one.
Detailed product information can also be saved in PDF format    PDF
News
23/12/2022  |  Synthesia
PF 2024