pigments.synthesia.eu / Organic pigments / Organic coatings / VERSAL YELLOW 10GD
VERSAL YELLOW 10GD
|
TiO2 1:1 |
TiO2 1:10 |
| Characteristic | |
| C. I. | Pigment Yellow 4 |
| C. I. No. | 11665 |
| CAS No. | - |
| Chemical Class |
Monoazo |
| Properties | |
| Oil Absorption [ml/100 g] | 72 |
| Density [g/cm3] | 1.4 |
| Bulking Volume [l/kg] | 7.0 |
| Fastness | |
| Linseed Oil | 4-5 |
| White Spirite | 4 |
| DEHT | 3 |
| Xylene | 2-3 |
| Acetone | 2-3 |
| Butylacetate | 2 |
| Ethanol | 3 |
| Water | 5 |
| HCl 2.5% | 5 |
| NaOH 2.5% | 4 |
| Light - Full Shade | 7 |
| Light - 1/1 | 7 |
| Light - 1/3 | 6-7 |
| Weather - Full Shade | 4-5 |
| Weather - 1/1 | 4 |
| Weather - 1/3 | 4 |
| Overspray | 4 |
| Heat Resistance [°C] | C 140 |
| Migration | |
C - in Coatings
| Application Possibilities | |
| Printing Inks - Water based | 
|
| Printing Inks - Offset | 
|
| Paints - Decorative |
|
| main application
| side application
|
| Other Informations | |
| Shelf Life | 48 months |
| Testing methods | |
|
Density - determined by ČSN EN ISO 787-10: 1997 (67 0520) in v g/cm3 Bulking Volume - denotes the volume of 1 kg of loosely poured pigment, expressed in litres Oil Absorbtion - determined by ČSN EN ISO 787-5: 1997 (67 0520) in ml/100 g pigment Fastness to Solvents - colouring of solvent after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one Fastness to Reagents - colouring of reagents after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one Light Fastness - Xenotest - determined by ČSN EN ISO 105-B02: 2000 (80 0147) and evaluated in 1/3 and 1/1 of standard depth and in full shade; determined according to blue scale, by it degree 1 denotes the lowest fastness, degree 8 the highest one Weathering Fastness - Xenotest - determined by ČSN EN ISO 105-B04: 1998 (80 0171) and evaluated in 1/3 and 1/1 of standard depth and in full shade; determined according to grey scale, by it degree 1 denotes the lowest fastness, degree 5 the highest one Overspray Fastness - assessment of bleeding into a white nitrocellulose combination lacquer for 60 min. at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one Heat Resistance - the values quoted indicate up to what temperature the pigments do not significantly alter; these are guide values which can be influenced by the binder used and the period of exposure to high temperature Migration Fastness - assessment of bleeding into a white polyvinylchloride sheet for 24 h at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one; no data means that the pigment is not recommended for dyeing of PVC Fastness to plasticizers - colouring of plasticizer (diethylhexylterephthalate) after 24 h at 20 °C acording to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one |
|
Synthesia introduces a new pigment
Synthesia will be presented at the European Coatings Show 2025
PF 2025
